Remet Pro Series RP150 PTO Branch Logger
The Remet CNC RP150 Pro Series PTO Branch Logger is a great machine for quickly and efficiently cutting branches up to 5.12" (13cm) into firewood using a tractor with as little as 45hp at the PTO. This 8 knife model will product cut lengths from 4-7 inches and can be run with only 4 knives installed to effective double the cut length. The cutting mechanism is precision made on a CNC machining center, to ensure proper quality, accuracy and coaxiality (tolerance for how closely the shaft axis are aligned), which translates into a long service life of the components and the entire assembly. This model can be equipped with a flywheel/ pulley, a single or double bagger, and a foldable pivoting belt conveyor, to allow for discharging to the rear or side of the unit.
The conveyor option requires a hydraulic power source from the tractor.
- Welded construction
- Additional rear shaft for the flywheel/ pulley
- Adjustable clearance between the blades
- Induction hardened gears
- Extended, profile-reinforced, foldable drop-in hopper with safety switch
- Reinforced frame
- Ball/pin hitch for trailer
- Class I/II three-point attachment system to the tractor
- When ordered without a conveyor this model includes single bag holder for filling mesh bags.
- 30cm x 3.0m hydraulic belt conveyor with galvanized steel cleats - 12"w x 118" long conveyor
- 16.5" diameter, 110 lb. flywheel
- PTO shaft with friction clutch (An alternative PTO shaft with shear bolt is also available separately.)
- We recommend the optional flywheel to increase performance and especially when using a lower horsepower tractor.
- We recommend the use of a friction clutch PTO to protect both the branch logger and the tractor from shock loads.
|Minimum/recommended power||45/80 HP|
|Max. branch cutting diameter (fresh soft wood)||130mm / 5.12"|
|Max. branch cutting diameter (fresh hardwood)||120mm / 4.72"|
|Max. branch cutting diameter (dry hardwood)||110mm / 4.33"|
|The thickness of the cutting mechanism housing||20mm / 0.787"|
|Cutting knives||Wear-resistant steel with increased hardness|
|Bag holder||62/38 cm - 24.4/15"|
|Chipper mounting system||Class I/II three-point suspension system|
|Trailer hitch towing capacity||1000 kg / 2,200 lbs.|
|Width/ length of the conveyor||30/300 cm - 12/118"|
|Conveyor belt drive||Hydraulic motor - includes hoses|
|Conveyor turning angle||90˚|
|Max. working height at a tilt of 45˚||230 cm - 91"|
|Length of cut branches (6 knives)||12-18 cm / 4.75-7"|
|Length of cut branches (8 knives)||10-15 cm / 4-6"|
|Weight of unit with conveyor (excludes 110 lb. flywheel option)||440 kg / 970 lbs.|
|Weight of base unit (excludes 110 lb. flywheel option)||320 kg / 705 lbs.|