Remet CNC

Remet RP120 Pro Series PTO Branch Logger

Remet RP120 Pro Series PTO Branch Logger

$3,280.00 - $6,376.00
  • SKU: RM-RP120xK-x-x-x
  • Weight: 683.00 LBS
  • Shipping: Calculated at Checkout
In Stock & Ready To Ship!
Current Stock:Only left:

Remet Pro Series RP120 PTO Branch Logger

The Remet CNC RP120 Pro Series PTO Branch Logger is a great machine for quickly and efficiently cutting branches up to 4.33" (11cm) into firewood using a tractor with as little as 25hp at the PTO. This 8 knife model will product cut lengths from 3-6 inches and can be run with only 4 knives installed to effective double the cut length. The cutting mechanism is precision made on a CNC machining center, to ensure proper quality, accuracy and coaxiality (tolerance for how closely the shaft axis are aligned), which translates into a long service life of the components and the entire assembly. This model can be equipped with a flywheel/ pulley, a single or double bagger, and a foldable pivoting belt conveyor, to allow for discharging to the rear or side of the unit.

The conveyor option requires a hydraulic power source from the tractor.


  • Welded construction
  • Additional rear shaft for the flywheel/ pulley
  • Adjustable clearance between the blades
  • Induction hardened gears
  • Extended, profile-reinforced, foldable drop-in hopper with safety switch
  • Reinforced frame
  • Ball/pin hitch for trailer
  • Class I/II three-point attachment system to the tractor
  • When ordered without a conveyor this model includes single bag holder for filling mesh bags.


  • 25cm x 2.3m hydraulic belt conveyor with galvanized steel cleats - 10"w x 91" long conveyor
  • 14.2" diameter, 83 lb. flywheel
  • PTO shaft with friction clutch (An alternative PTO shaft with shear bolt is also available separately.)


  • We recommend the optional flywheel to increase performance and especially when using a lower horsepower tractor.
  • We recommend the use of a friction clutch PTO to protect both the branch logger and the tractor from shock loads.
Minimum/recommended power 25/35 HP
Max. branch cutting diameter (fresh soft wood) 110mm / 4.33"
Max. branch cutting diameter (fresh hardwood) 100mm / 3.94"
Max. branch cutting diameter (dry hardwood) 90mm / 3.54"
Spacing between shafts 115mm / 4.53"
The thickness of the cutting mechanism housing 20mm / 0.787"
Cutting knives Wear-resistant steel with increased hardness
Bag holder 62/38 cm - 24.4/15"
Chipper mounting system Class I/II three-point suspension system
Trailer hitch towing capacity 1000 kg / 2,200 lbs.
Length/width of the conveyor belt 230/25 cm - 91/10"
Conveyor belt drive Hydraulic motor - includes hoses to tractor
Conveyor turning angle 90˚
Max. working height at a tilt of 45˚ 180 cm / 71"
Length of cut branches (6 knives) 8-15 cm / 3-5"
Length of cut branches (8 knives) 5-10 cm / 2-4"
Weight with conveyor belt (does not include optional flywheel weight) 310 kg / 684 lbs.
Weight without conveyor (does not include optional flywheel weight) 230 kg / 507 lbs.