Remet CNC

Remet RP200S Super Pro Series PTO Branch Logger

Remet RP200S Super Pro Series PTO Branch Logger

$12,743.00 - $13,673.00
  • SKU: RM-RP200S8K4C-x
  • Weight: 1,764.00 LBS
  • Shipping: Calculated at Checkout
In Stock & Ready To Ship!
Current Stock:Only left:

Remet Pro Series RP200S Super PTO Branch Logger

The Remet CNC RP200S Super Pro Series PTO Branch Logger is a great machine for quickly and efficiently cutting branches up to 6.30" (16cm) into firewood using a tractor with as little as 70hp at the PTO. This 8 knife model will product cut lengths from 6-10 inches and can be run with only 4 knives installed to effective double the cut length. The cutting mechanism is precision made on a CNC machining center, to ensure proper quality, accuracy and coaxiality (tolerance for how closely the shaft axis are aligned), which translates into a long service life of the components and the entire assembly. This model comes equipped with a flywheel and a foldable pivoting belt conveyor, to allow for discharging to the rear or side of the unit.

The conveyor requires a hydraulic power source from the tractor.


  • Welded construction
  • Additional rear shaft for the flywheel/ pulley
  • Adjustable clearance between the blades
  • Induction hardened gears
  • Extended, profile-reinforced, foldable drop-in hopper with safety switch
  • Reinforced frame
  • Ball/pin hitch for trailer
  • Class I/II three-point attachment system to the tractor
  • When ordered without a conveyor this model includes single bag holder for filling mesh bags.
  • 40cm x 4.0m hydraulic belt conveyor with galvanized steel cleats - 16"w x 157" long conveyor
  • 176 lb. flywheel w/ cover


  • PTO shaft with friction clutch (An alternative PTO shaft with shear bolt is also available separately.)


  • We recommend the use of a friction clutch PTO to protect both the branch logger and the tractor from shock loads.
Minimum/recommended power 70/100 HP
Internal width of the mechanism 300mm / 11.8"
Max. branch cutting diameter (fresh soft wood) 160mm / 6.30"
Max. branch cutting diameter (fresh hardwood) 150mm / 5.91"
Max. branch cutting diameter (dry hardwood) 140mm / 5.51"
Spacing between shafts 200mm / 7.87
Thickness of knives 15mm / .591"
Diameter of the gears 300mm / 11.81"
The thickness of the cutting mechanism housing 20mm / 0.787"
Recommended PTO shaft revolutions 440-540 rpm
Overload clutch recommended 2500-3500Nm
Cutting knives Wear-resistant steel with increased hardness
Bag holder 62/38 cm - 24.4/15"
Chipper mounting system Class I/II three-point suspension system
Trailer hitch towing capacity 1000 kg - 2,200 lbs.
Width/ length of conveyor 40/400 cm - 16"w x 157"
Conveyor belt drive Hydraulic motor - includes hoses
Conveyor turning angle 90˚
Length of cut branches (6 knives) 18-30 cm / 7-12"
Length of cut branches (8 knives) 15-25 cm / 6-10"
Weight of the chipper with a conveyor belt 800 kg / 1,764 lbs.
Flywheel with cover 80 kg / 176 lbs.