Wood-Mizer PC200 Power Feed Trim Saw

Wood-Mizer PC200 Power Feed Trim Saw

 The PC200 single end power feed trim saw from Wood-Mizer makes trimming the ends of deck boards and stringers safer and more efficient. 

How it Works:

1. Adjust the four quick-adjust board stops from 21” to 66” at the desired board lengths using the easy to read scale.
2. The operator turns on the blade motor and power feed with a single on/off switch and adjusts the variable feed speed for optimum efficiency.
3. Boards of varying lengths are loaded onto the gravity-assist incline.
4. Three heavy-duty #2060 roller feed chains with lugs at 12” spacing move boards up the table through the 18” diameter nail-resistant carbide-tipped blade trimming one end of the board.
5. Cutoffs from each board are dropped onto an optional conveyor system or into a container for recycling.
6. Trimmed boards continue moving up the incline table to the 58” drop height and drop onto a sorting table or into a bin for further processing.

Safety and Maintenance:

• Blades can be resharpened. Changing a blade is easy with the removable blade plate.
• Grease points are easily accessible.
• For added safety features, all chain sprockets are enclosed below the table.
• Two emergency stops are located on the machine.
• A convenient reversing switch assists with removing material should a jam occur.

Details:

• Single phase or three phase 10HP NEMA Premium Efficiency electric saw motor
• Variable speed 1/2HP feed motor with gear reduction
• 21" to 66" long material capacity up to 2" thick and 10" wide
• Process up to 12,000 boards per 8 hour shift with one operator
• Overhead blade design pushes material downward towards the table reducing the risk of kickback
• Gravity assist incline feed with 58" drop height
• 18" carbide-tipped circular saw blade with 1" diameter arbor bore
• 4 quick adjust board stops cam lock to 1" bar with measurement scale
• Reversing switch to aide with jammed material
• Minimum material length: 21"
• Built in the USA